oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Ansmann Racing (http://www.oople.com/forums/forumdisplay.php?f=81)
-   -   what are doing with the thrust race in the monkey/rat (http://www.oople.com/forums/showthread.php?t=81371)

danny the elfman 23-09-2011 02:47 PM

what are doing with the thrust race in the monkey/rat
 
hey guys, Im getting through loads of thrust bearings and i dont know why, ive got grease in the diff and i think the diff is set properly. Has anyone solved this problem with a replacement or anything? Thanks for reading

luniemiester 23-09-2011 03:31 PM

Are you using both types of grease when you build the diff and thrust washer assemblies (clear and black)

There is a good video on you tube of how to build and set a ball diff. Search for racer53, you may be overtightening the diff screw when building it up

MikePimlott 23-09-2011 03:46 PM

Replace the kit bearings with buds balls ceramic balls and 2 thrust washers.

PM Budfish on oople. Or theres a link in my sig where you can find him.

Mad-Wolfie 23-09-2011 04:25 PM

Quote:

Originally Posted by MikePimlott (Post 557957)
Replace the kit bearings with buds balls ceramic balls and 2 thrust washers.

PM Budfish on oople. Or theres a link in my sig where you can find him.

I've never changed the bearings. I didn't use the silicone grease in the kit that looks like a little pot of vaseline when building the car, i tend to use teflon cycle grease instead rather than the silicone stuff. £6 a tube from Halfords & it's good stuff IMHO.

Ansmann high-speed diff grease is very similar stuff, comes in a tub that looks like strawberry jam. Part number 283000001 & about £6 a tub.

danny the elfman 23-09-2011 04:43 PM

i have ceramic balls so thats not a problem. And ive set it its the lightest i can get it without it just spinning up. But i only used clear grease as thats all it said to do. So i'll watch the vid and have a look. Thanks for the replies

4_cell_racer 23-09-2011 05:51 PM

Quote:

Originally Posted by danny the elfman (Post 557984)
i have ceramic balls so thats not a problem. And ive set it its the lightest i can get it without it just spinning up. But i only used clear grease as thats all it said to do. So i'll watch the vid and have a look. Thanks for the replies

Associated black thrust race grease is what I've used on my buggy/SCT and I'm still on the original thrust race :thumbsup:

maseace 23-09-2011 07:27 PM

I agree this is the way forward


QUOTE=MikePimlott;557957]Replace the kit bearings with buds balls ceramic balls and 2 thrust washers.

PM Budfish on oople. Or theres a link in my sig where you can find him.[/QUOTE]

Battle_axe 23-09-2011 08:12 PM

the simple answer here is to either get a new thrust race and use a good amount of assoo black grease on it with silicone greace on the balls in the diff or what i would do for a little more inital expense install the B-fast diff kit = problem solved :thumbsup:

lordnikon 24-09-2011 03:34 PM

Stripped my mm diff last night and my thrust bearing is minced too.

Whats needed to replace this with something stronger ??


All times are GMT. The time now is 10:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com