what motor pinion
 

what tooth motor pinion should i use on my b44 roller, car will mostly be indoors (sports hall) and hopefully outdoors in the future, any links would be appreciated:thumbsup:

All depends on motor and spur size!

motor is a 6.5t and spur i think is standard

Start around 19-20t, the brand of motor and size of the track matters too - but that should be a good place to start for a smaller track :)

Correct, the spur fitted is a 84t but there will be a 81t & a 78t supplied with the car spares as well :D
I have been running a 20t with the 84t on a 5.5t motor but that was mainly at stotfold on astro

:thumbsup:cheers gainsy:thumbsup:

ooooOOO think i might have to change my pinion then as im running a 23t pinion 84t spur on a losi excelorin 6.5t motor :o

cheers :thumbsup:

Don't change too much - alot is motor dependant.

I run a SP V3 6.5 on 22/84 indoors and use that most times outdoor as well.