Wheels!
 

What other wheels can fit on a Durango 1/10th apart from the TD wheels?
Oli
:thumbsup:

any pretty much.

it has pins in the rear - 12mm hex in the front

B44 wheels fit, but the offset on the rear is different i believe.

I found the B44 wheels make the car slightly narrower all round. Makes the front wheels cut into the ball cups a little at full lock. But otherwise fit fine.

Hexes in the front is not 12mm though. They are an imperial sized hex, ca 9,8mm. Kyosho, touring cars, Ansmann are using 12mm Hex`s. The new V3 uses 14mm Hex`s for the wheels.