ko propo bmc 1.5 info please
 

just won one of these on the bay but dont no any one who runs it n there buggy but i did see je spares selling them last year and they were pricey and supposed to be ace
has any one on here got one and what is it like to set up withuot the pc link and is there any set ups you would recommenned or any other advice you would give on this speedo
i am pretty rough on escs so any advice on this one before blow it up is appreciated:thumbsup:

Also I forgot to ask if the telin is the same esc and wether the pc link works with this bmc model
Cheers

The tekin? is a diff esc, the ko vfs1.5 bmc is the same as an orion one i think the vortex, the throttle settings are done via the link usb in laptop to the receiver wire on the speedo, the software is available from the ko website, you can create your own or download one of there's to the speedo, i used the 4wd power one and worked well until the speedo got a problem and started stuttering (it was old and not in good con, got it cheap:woot:) i had the brushed vfs1 from new and never had a problem with it:) you need the ko usb link to alter the throttle profiles, i do have one i might part with, pm me.

I use these speedos and they are ace!! :thumbsup:

I also have link lead and software so you change settings etc..

From new you have to set to lipo cut of as its set as standard to nimh.

I may have these up for grabs as im getting the new R10's to have a play with!

:thumbsup: