B4.1 Setup Grass
 

Hi Ya people,

Please can someone help..?:eh?: I have recently come back to 1/10th off road after 10 years.... I am racing at the Hinckley dboots GP at the bank holiday but havnt raced my car out doors as yet, so dont have a scooby doo :confused: how to set it up. I know there are several setup sheet on CML and Associateds website but its un clear to the exact track type only giving names.

I would much appreciate a nudge in the right direction for running on grass...

Thanks

Michael :thumbsup:

Hey,

This set for Bradder for Oswestry should get you close.

http://www.cmldistribution.co.uk/pro...20Oswestry.pdf

If is high traction try blue springs on the front and silver on the rear.

MiCk B. :-)

30wt Blue Springs Front
25wt Green Springs Rear

Middle hole on both mounts.
Inner hole on rear wishbone
Inner hole on front wishbone

Nice one... cheers lads... :thumbsup:

Shall I try softer front springs if the track is very bumpy? Blue sounds like very stiff. I am running Vega B4 if it matters

I run blue front, tried softer but changed back.
Couple washers under the inner ball studs helped as well, as did adding weight.
Tyre weights stuck to the servo and in the small triangle spaces. An under lipo weight if you can make something up helps as well.