Need opinions for brushless
 

Hey guys! I'm trying to debate on either getting a Novak mongoose or lrp mini vector? Any suggestions? Or suggestion on other motors? It's for my mini inferno.

most guys at our track are running the 10.5 and 13.5 black novak three 80 micro motors in their cars and have had no problems with them and damn are they rapid...

i have a silver 8.5 novak three 80 micro motor and ive not been so lucky as the yellow wire came unsoldered from the motor windings,

soldered it on but it came off again, "damn you cheap solder"

cant say anything about the vector sorry, nobody uses them at our track

Thank you I'll look into it. I have another question will I be able to run any of these motors with a mamba max pro? Only reason I ask is cuz I have a spare one.

I have Novak mongosse speedo and 10.5t motor is interested pm me :-)

go for ezrun 25a 12t combo if 2030 motor over heats then grab yourself an emax 380 motor 4980kv. As quite a few national micro racers switched from mongoose for ezrun more reliable don't over heat.
in my blaze i'm using ezrun 60A minus fan with mamba cm26

once mmp has sensor port can use with mongoose/lrp motors

Ive ran both, but prefer the Ezrun with a turnigy motor,smooth power delivery ,run cool and dam good price imo

Avoid the ezrun with 12t motor I have had one these and they overheat like no body's buisness.
There are just as many running mongoose as the ezrun setup at national level.
I am currently running a lrp sxx with a 8.5t motor in my shark lwb.
Before that I ran a mongoose esc and 10.5t for 2 national seasons with no
Problems.
The ezrun 25a speedo and the turnigy motor is also a good combo.
Altho I still prefer sensered to senserless.

Thanks guys for the response ima check out the turnigy does any one have a link to one with a reasonable price? And Will the mamba max pro fit?

This is what we run in 16th 4wd - http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

and speedo ... http://cgi.ebay.co.uk/Hobbywing-EZRu...item2a0b3914b6

Just be aware that free postage means it'll take 2 weeks to come from HK, :o good price tho ... :thumbsup: motor is from the UK ....