oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Associated (http://www.oople.com/forums/forumdisplay.php?f=24)
-   -   B44.1 Setup from Talywain and Kiddy Nats (http://www.oople.com/forums/showthread.php?t=73621)

markwilliamson2001 22-06-2011 11:06 AM

B44.1 Setup from Talywain and Kiddy Nats
 
Hi all,

Have any of the top boys got their setups from Kiddy and Talwyain Nats for the B44.1?

I see that Ghea pistons all round, and cut down grey springs on the front seem popular at present (according to Bradby setups) but can anyone provide me with a setup sheet please?

Cheers
Mark

_sleigh_ 22-06-2011 01:13 PM

Hi Mark,

I'm on a course this week, but will try to upload my set-up from Kiddy to CML's site ASAP (via Wez).

BTW - I didn't use Ghea pistons :)

Cheers
Phil

markwilliamson2001 22-06-2011 01:56 PM

Cheers Phil.
See you Sunday if your attending :)

Belsten 22-06-2011 08:03 PM

Im by no means a top driver but I was in the C with my 44.1 and ran the following

Front
Silver springs
Losi 40wt oil
AE No 2 pistons, inside hole on tower, outer on wishbne

Rear
Silver springs (most ran greens)
GHEA No 1 pistons
Inside hole on tower and wishbone
Losi 35wt oil

Medium wheelbase, no anti squat shim, 1 deg alloy rear hubs, AE ballast weight

markwilliamson2001 22-06-2011 08:11 PM

Did you run any roll bars Dave? They seemed popular at Talywain, fro, the pictures anyway....
I always run a silver rear roll bar, and occasionally a silver front one when grip is high..

Belsten 22-06-2011 08:19 PM

yup sorry, silver roll bar front and rear at both Taly and Kiddy, it was high grip, on yellow mini's,
Taly I cut off inner and outer rows on front and rear
Kiddy, outside 2 rows front and rear and inside row all round


All times are GMT. The time now is 07:08 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com