oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Schumacher (http://www.oople.com/forums/forumdisplay.php?f=46)
-   -   SX3 Big Bore Shocks (http://www.oople.com/forums/showthread.php?t=73310)

Skidmark 18-06-2011 08:15 PM
SX3 Big Bore Shocks
 
Ok I'm confused:confused: I've built my shocks with the six hole pistons on the rear and the four hole pistons up front.

The front feels fine but the rear not so good so I started to think maybe I had assembled them incorrectly. Also reading the Rcracer build on this forum and I found myself reading this (A Titanium Nitride coated shock shaft is standard. Six-hole pistons feature up front and four-hole versions at the rear.)

Can anybody please confirm which is the correct way?:blush:

Thanks

Rob_B 18-06-2011 08:25 PM
Quote:
Originally Posted by Skidmark (Post 516621)
Ok I'm confused:confused: I've built my shocks with the six hole pistons on the rear and the four hole pistons up front.

The front feels fine but the rear not so good so I started to think maybe I had assembled them incorrectly. Also reading the Rcracer build on this forum and I found myself reading this (A Titanium Nitride coated shock shaft is standard. Six-hole pistons feature up front and four-hole versions at the rear.)

Can anybody please confirm which is the correct way?:blush:

Thanks

I would say it's 4 upfront 5 or 6 rear

MattADH 18-06-2011 08:43 PM
My error - sorry. Six-hole rear pistons and four holes at the front.

Will amend the review as necessary...

sime46 18-06-2011 08:52 PM
I've gone for 4 in front and 5 in the rear.

Skidmark 18-06-2011 10:16 PM
Thanks for clearing that up for me:thumbsup: I'll be running the car for the first time tomorrow so I'll see how it goes!


All times are GMT. The time now is 06:57 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com