![]() |
next question
Got my car nearly setup just having a problem with the rear stepping out as you come on the power after a corner, this is on the slippy floor part of the track (although that is most of the track :o) my setup on the back at present is
0 degree camber 3 degree per side toe in 22mm ride height 5.5 turn spring 50 wt oil kit piston middle hole on rocker any help or suggestions appreciated peter |
Add some more toe-in, soften the oil a little.
Are there many jumps? What tyres are you using? G |
Yes there's a few jumps and i'm using mini spikes.
peter |
BIG jumps?
Spikes suit the Pred better than pins. Try what I suggested, let me know how it goes. G |
Went down to 40 wt oil and added 0.5 degree of camber, totally different car to drive, went so much better.
cheers for the help peter |
Could you also share your setup for the front section?
Thx :) |
Quote:
G |
Quote:
1 degree toe out 0 degree camber 30wt oil kit piston 6.5 turn spring castor 0 washers behind upper arm 16mm ride height |
All times are GMT. The time now is 08:48 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com