speed passion pro2 esc settings
 

hi i have the speedpassion pro 2 esc in my xray t3 touring car last few weeks been having problems with it loosing power after 3mins like it is in sensorless mode i have changed sensor cable and sensor board in my 13.5 speedpassion v3 motor first few mins the t3 flies great top end and great accelaration motor is coming of at 72 c i have fdr of 6 esc is not over heating as no light flashing on it after 5 mins racing here are my settings
forward only
drag brake force 25%
drrs punch level 8
brake force 75%
initial brake 0% neutral range 6%
amts timing level 8
sc boost level 7
sc rpm delay 4000
full throttle delay 0.1
sc punch level 4
any ideas or settings to change to would be most appreciated
ps i have new 5800 60c lipo batterys http://www.rctech.net/forum/images/icons/icon1.gif speedpassion pro 2 esc settings
hi i have the speedpassion pro 2 esc in my xray t3 touring car last few weeks been having problems with it loosing power after 3mins like it is in sensorless mode i have changed sensor cable and sensor board in my 13.5 speedpassion v3 motor first few mins the t3 flies great top end and great accelaration motor is coming of at 72 c i have fdr of 6 esc is not over heating as no light flashing on it after 5 mins racing here are my settings
forward only
drag brake force 25%
drrs punch level 8
brake force 75%
initial brake 0% neutral range 6%
amts timing level 8
sc boost level 7
sc rpm delay 4000
full throttle delay 0.1
sc punch level 4
any ideas or settings to change to would be most appreciated
ps i have new 5800 60c lipo batterys

speedo trouble
 

Hi mate I have the hobbywing xtream stock. I think they are the same speedo.
If you have a look on utube there is a tutorial for the xtream stock. The main thing to watch for is all ways flash any up dates or soft ware twice into the program box as well as your speedo.
hears the links.

Part 1 ------> http://www.youtube.com/watch?v=bUKMoGvRJZY

Part 2 ------> http://www.youtube.com/watch?v=iOCFkCwBlrQ

this man knows what he's talking about.
There's a good source of info on set up's on this site.

http://www.rctech.net/forum/electric...ings-only.html

hope this helps.