oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)
-   -   Connection on the Pulse 3-Ch EX03GPRO system (http://www.oople.com/forums/showthread.php?t=67602)

RoyalCBR 07-04-2011 07:25 PM

Connection on the Pulse 3-Ch EX03GPRO system
 
I was wondering if anyone had had the same problem as me.

I have this afternoon brought a new Pulse radio system, very nice bit of kit, and I thought great really easy to rig up and away we go - oh, no nothing is that simple! :confused:

Have a look at the pic to know what I mean:

http://www.mymcreative.com/stuff/IMG_0540.jpg

Anyone else had the same problem, or know of a solution?

Cheers, Mark

coolcars782 07-04-2011 07:35 PM

Whats wrong?

RoyalCBR 07-04-2011 07:47 PM

The White plug from the battery just won't fit, the fitting is too large for the plug on the receiver. I have tried it a couple of times but unless I hit it with a hammer it's like a square peg in a round hole :(

coolcars782 07-04-2011 07:51 PM

Well thats the wrong connection, that is the connection for a balance port for a lipo battery, it should be like this http://www.sussex-model-centre.co.uk..._Lead_3941.jpg

Are you trying to plug a lipo in direct? :confused:

mdb_75 07-04-2011 08:00 PM

You shouldn't be trying to plug the lipo's balance plug into the receiver! Just your steering servo, speed controller and transponder -if you have one.

RoyalCBR 07-04-2011 08:13 PM

The receiver has a port marked 'B' and the manual says Battery.

If the white plug on the battery cable isn't for the receiver, where does it go (and don't say where the sun doesn't shine :))?

So if I am right, I have drawn a diagram of my set-up, and is this correct?

http://www.mymcreative.com/stuff/set-up001.jpg

Cheers guys, I think without the help of people on here, my B44 wouldn't have been dropped off a very tall building :cry:

mdb_75 07-04-2011 08:17 PM

I think that looks correct!

Plug your steering servo into port 1 on the receiver and the speed controller into port 2. The speed controller powers the receiver and servo through port 2. Ignore the battery port unless you have a personal transponder which could go in there or in port 3 it doesn't matter which.

The white plug on the battery is for balance charging it. They're not normally on saddle packs like you've drawn though, only stick packs.

coolcars782 07-04-2011 08:19 PM

The port on the receiver is for a battery but not for us, it is used when running nitro/petrol cars which require a battery to power the receiver. You have drawn it correctly, this is an example from the novak site http://www.teamnovak.com/password/no...less_SetUp.jpg just think of the nimh as your LiFe

The white plug would be plugged into your charger to balance your cells.

RoyalCBR 07-04-2011 08:27 PM

Cheers guys, you are life savers :thumbsup:

If either of you are in the Milton Keynes area someday I own you a pint :thumbsup:

Cheers, Mark


All times are GMT. The time now is 09:00 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com