![]() |
Mysterious LiPo (and charging advice...)
Hi, I need some help with charging this battery I recently bought second hand. (it was in the box of a second hand RTR B4.1) Go easy on the lingo, I'm easily confused!!
Here's a photo, I think it's one of those cheap Hong Kong specials!.... [IMG]http://farm6.static.flickr.com/5212/...dd26e4ca2c.jpg R0017473 by Shortopia, on Flickr[/IMG] Loong Max (or Mai?) Tipple 20C 4000mAH I'm a bit confused with the cell rating which isn't clearly stated. I can't see a cell count number (ie 2s or 3s for 2 cell or 3 cell), but can I safely assume it's a 2 cell and 7.4 volts Why does it say 20c, but also 5C in the fiery logo circle? Is this saying I can charge it at 5c? The balancing connector only has 3 connections, and only fits into my chargers 2s port, so I guess this is another big clue. (The balancing connector must have more connections if it were a 3s battery?) I am using a new Fusion Ethos LX41B Pro charger. For a basic slow charge what would be my best settings? And for a race night with 5 minute races, wanting a faster charge, what can I push those settings to? Many thanks in advance. I'd rather not use my assumptions and get it wrong! |
Hi
Yes it is two cell (7.4v) 20c is the disharge rate,5c is the maximum charge rate which means 5times the capacity which is 4000mah x5=20 amps If you charge at this im not sure how long it would last i personally only charge @2c which would be 8 amps but if youve only got one,and you pushed for time you might have to charge higher HTH :) |
first of all yeh it looks like a 7.4volt or 2 cell lipo , 5 c is max charge rate, brca and everyone else recomends 1c charge rate,20c is discharge or punch from cell,but and its a big one most clubs like you to use hard case lipos so check first with your local club/clubs before using it there.safe charging rate is 4amps
|
Great, Thanks guys...
I did think it looked like a bit of a cheapy Hong Kong special, all big numbers but no knickers! My Fusion Ethos LX14B Pro Charger only goes up to 4 amps, not the 8 you recommend. So that will give me a slower, safer charge? I'll also talk to my local club and see if I'm legal! |
Quote:
It was 1c max ...... |
oops well spotted mark 1 c
|
1 Attachment(s)
Hi,
Just discharge at a maximum of 80 Amps ( 4000ma = 4 Amp x 20 ). Charge at about 4 Amps for longevity ( 4000ma = 4 Amp's ). Don't worry about it being made in China, as practically everything is nowadays, even the Girl I slept with last year. Lol. This junk is made in China, and it's proving OK; :thumbsup: |
actually very good cells, i have several packs, using these cells in my electrtic 1/8 and they are working just fine, and also my 1/18 and flying toys too. only downside as pointed out earlier is they are soft cased, fine for bashing etc but brca clubs may not let you run them.
|
All times are GMT. The time now is 02:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com