Servosaver or not?
 

Hi,

I've just done a second set of gears on one of my Savox servos. I currently run without a servosaver, however I'm now thinking that maybe I should run one.

What are you guys running, and can you recommend a decent saver?

what car you running? Do savox have all metal gears or is there a plastic one in there?

Im wondering the same thing
http://www.oople.com/forums/showthread.php?t=64602
as I have a BJ4WE without and a mate has a schumacher sv without. I have purchased a B44 one to try out but need advice on the mates one

TRF511 with a Savox 1252MG servo.

I've run my X6 with a servo saver for about a year without problems. Glued it together on saturday as thought it might help handling. It made no difference and I snapped a servo horn 3rd race out on Sunday. I say they're a good thing!

i would never run without one, if you have space use the 1/8 kimborough servo saver for 10th buggy, problem is the amount it sticks down below the servo.

Matty would never run with one, makes the car slow and not very precise,

I run the Savox 1258 without servo saver and never had any problems at all

I can't find the Savox 1252MG on http://www.cmldistribution.co.uk/cml...d.php?brand=99

Are you sure it's that number?

Also, which bit of the gears has been 'done'?

Personally I run solid, no servo saver.

i dont run them in my tc or buggy(buggy has 1 built in) run 1 in my m03 and f103 the kimborough 1s are prob the best ive used

Sorry its a 1521mg. Not sure yet as ive not opened it up, but it sounds very gritty.

Probably 1251mg!?