Machine Shops
 

Guys,

I've designed some parts I need to get machined out of aluminium fairly quickly as part of a touring car chassis conversion I'm working on, unfortunately the chap who was making them has been struck down with a vicious illness so can't finish them off. Can anyone recommend anywhere that might be able to make these up within a fairly tight timescale? I need to get them on the car in the next fortnight so I can make sure they work with the carbon fibre chassis plate and top deck I've already had cut and am testing at the moment.

Thanks!!!

P.M me with details or images as to roughly what your looking for and ill see if we can help out.

...and if he cant help i'll have a look...

If anyone wants to see what I need to have made have a look at;

http://www.akularacing.co.uk/akula-products/

There are some CAD screenshots of the three parts I need manufacturing along with some photos of the rest of the conversion.

If anyone can help either PM me or e-mail [email protected]

Hi guys,

I'm looking for essentially the same thing as the OP.

I would like to get four parts made out of aluminium for a M-chassis conversion of my own design (2 for the motor mount/transmission housing, 2 for the rear suspension components). Everything else on the car is either original Tamiya parts or simple fibreglass plate.

Do you guys know of anyone who can offer such a service?

Cheers

Joe

(P.S. First time poster, bit nervous, etc etc :woot:)

you have a pm!