Rudebits B4 under servo weight
 

Will the B4 servo weight fit under the servo in the x6?
If not, I can't see how the normal rudebits x6 servo weights will fit behind the servo with the new saddlepack chassis? The wall has to be taken down from behind the servo on the chassis, to allow the speedo to fit in front of the saddles.

The only way to get it to fit, is to either shave the weights down slightly front and rear, or move the servo forward a few mm.

Is this right?

It is tight with them Mark, but with "most" conventional ESC's they will fit in still between servo and speedo

I have a Speed Passion GT2.0 LPF...How big (front to back) are the servo weights, just so I can do some measuring!