HELP!!! hobbywing 35a
 

HI all, i have just got a second hand Hobbywing ezrun 35amp, i am not sure if this has got turbo timing, and secondly it does not seem to have a sensore wire, will this cause a problem connecting it to a sensored brushless motot 13.5 t.

I am an alright racer but do lack alot of Knowlage about this.

I was hopeing it would fit into my xray t3, but i think i have just wasted my money jumping in feet first without knowing about it.:cry:

Any comments or good advice please, thanks

hmm..
 

I have one of these - as far as I am aware its sensorless - I run it with a 9t ezrun sensorless.

It does not have "turbo timing" as for as i can suss out from the programming guide.

Hope thats of some help - think others may have more of a say on the whole sensored with sensorless issue.

You've pretty much summed it up.

eZruns are sensorless and have no "turbo" (it's technically impossible for a sensorless system to have any "boost" or "turbo" settings).

It will probably run your sensored racing motor but without the sensors, so may well feel a bit notchy on the throttle.

You are better off getting a sensored speedo for racing. Hobbwing's XERun is sensored, as are most racing speedos.

Thanks to replies,you have comfirmed what i thougt plus more, i'll keep an eye out for a Tekin or Nosram pearl or hobbywing xerun but all with sensors. cheers

try this site http://www.giantcod.co.uk/hobbywing-escs-c-21_217.html its the extreme stock one you want £59.21 many people have these at my club very fast hope this helps

Thanks for the info, this is exactly what i am after cheers.

Do you know what program box is needed for it ?

Thanks again steve

Thanks

+1:thumbsup:
for the xerun extreme stock from giantcod i have 4 now get while you can (no connection to GC apart from i cant stop buying speedos from them!)

dave