dex410 set up
 

can some one give me a bit of giudance on the best set up for polished wood floors as i carnt stop the back end kicking out (pengalim effect)when taking up drive out of the corners, unless i back the slipper right off

current set up is
35wt Front shocks stock blue springs
30wt Rear shocks light green springs
1200wt fFont diff
5000wt Rear diff
Rear weight set
21mm ride hight Front and Rear

Take the weight kit off.

G

Is your servo saver tight?

shouldn't the front diff be tighter than the rear?

are you running standard pistons?

in low-grip, thin out your diff oils, try a 5k front and 2k rear

What wheelbase are you running?

try my setup from hereford indoors, it was pretty slippy there ! :

http://www.team-durango.com/pdf/setu...l_23_01_11.pdf

Heres my setup guide too which should help..

http://burninrubber.co.uk/#/setup-guide/4539947670

link doesn't work for the guide

Just click on the link on the page it takes you to.

worked for me

yeah I swapped from 10k/5k to 7k/3k on slippy floor and it's working so far