B4 Hub Carrier Mod?
 

Anyone know how to convert the cougar to Run Asso B4 Front hub carriers?

I have seen a couple of guys running them, but have no idea what needs to be changed...

Cheers!

I've done it a few times so that I could try the AE Inline Axles.

I took a 3mm drill and drilled out the Schumacher caster block and AE steering block (& axle), then used a 3mm pin of the correct length and secured it with e-clips.

:thumbsup:

I can go through it with you at the next Saturday meeting at silverstone, will bring my tools with me.

Cheers,
Jimbo.

tools

Cheers Gents,

Jim, see you at MA....

So, how did the car performed with the inline axles? Is it worth a try?

I was thinking of trying the same, or doing something like the TL22 solution. Any plans from shumacher to test with parts from the 4wd?

wonder if the TRF201 would be a direct drop in

or schumacher make them to not snap when you sneeze on them:thumbdown:

Or sell them at a reasonable price!!

The in-lines are used to move the wheels forward to allow for more rear weight bias, but now with the new +8mm chassis, this mod isn't really needed.

In-lines were OK in certain conditions but I didn't really like how they effected the ackerman, it just never felt right, so I just stick with the standard axles now.