Some B4 tips?
 

Hi,

Martijn again,

Do you guy have some tips, mods or anything else?
Like some parts or upgrades that are good for my B4?

Thanks

Run a small rear wing with not much gurney, it doesnt like it.
The B44 rear hubs are a worthwhile upgrade. You will need the larger outer bearing, and the different crush tube, the one from the original B4 hubs will not fit, as it is too long.

In terms of adjustments, i used to alter:

Front inner ballstud height
Rear wheelbase at hub
Rear shock mounting location on tower.

That was about it really.

If i was getting grip roll, or very high grip, adding a washer or two under the inner rear ballstud used to help.

Hope this helps.

Ok, thanks,

I'm was planning of buying a J concepts JConcepts Illuzion 6.5" Downforce V-Wing? Some people say that it gives u more rear grip?

And the bearing in the hub? these? 3/16x3/8

Martijn

Its okay...just dont run a full gurney on rear part of the wing...makes the car very understeery at speed if you do.

...or run the jconcepts front wing to compensate.

I'v heared that if u run a front wing, the cars handles agressive..
So I thinks I'm going to stick with just only the rear wing..

What do u guys think about a sway bar for the B4? Does it helps or?