servo reverse, 3VC
 

Hi all, stupid question time.....how do you reverse the steering servo on a futaba 3VC??
Built up my Cat and the steering goes the wrong way, don't have instructions for the tranny, and have spent ages looking online.

thanks, John

Hi mate..

well this is the how to guide.

use the UP-DOWN button to select the menu screen

press the SELECT button use the UP-DOWN button to select the function CH-REVERSE

well thats what the manual told me

Here's a link to the 3VCS manual, I assume it's similar to the 3VC.

http://manuals.hobbico.com/fut/3vcs-manual.pdf

Hi mate just found this for you enjoy...:p

http://manuals.hobbico.com/fut/3vcs-manual.pdf

hi mate, can't see "CH-REVERSE" anywhere, been looking for ages!

mine is 3vc, not 3vcs if that makes a difference??

thanks john

thanks for the manuals guys

3VCS is a different screen, so the manual won't be much use. This radio - http://manuals.hobbico.com/fut/3pjs-manual.pdf - has the same screen.

G-46's instructions were about right - press UP+DOWN together, then use UP (or DOWN) to reach the REV. xxxx menu item, and use + or - to reverse.

ah thanks everyone.....FOUND IT! lol

didn't know about that pressing up and down together trick!

cheers, John

up and down together trick is for if you have it set as a fast link, its where you can have X-amount of setting in one screen.:p

I think you must be talking about the 3VCS because the 3VC doesn't have this feature.

I was mate, stupid me never notices the S missing for the thread title. :blush:

I Have a 3VC, let me just check. Pretty sure i can work it out :)

Right....

Press the 2 middle silver buttons (ST.EXP & ATV) at the same time. Then scroll through the options using the ST.EXP or ATV button until you find "REV". It will either say NORM or REVE next to it and you can change by pressing the "custom" button (bottom right) and the "select button" (Bottom left to scroll between throttle and steering. As you scroll through the options REV is inbetween BT1 and TILT.

Although it looks the same as 3VCS my understanding is the options are very different . The 3pjs which is a wheel radio has the same options as the 3vc and is what i used to work everything out.

Here is a link to the manual http://manuals.hobbico.com/fut/3pjs-manual.pdf

Hope it helps

Dave

Thanks Dave, that's very useful. Had been messing around with it for ages!

there are a hell of a lot of things on there that I didn't know about, I'll download the 3pj manual.

John