oOple.com Forums - lipo problems

oOple.com Forums (http://www.oople.com/forums/index.php)

- Team Durango (http://www.oople.com/forums/forumdisplay.php?f=80)

- - lipo problems (http://www.oople.com/forums/showthread.php?t=60477)

purplenut

06-01-2011 09:39 PM

lipo problems

Ok i for some reason can not get the long body clip through when putting the lipos in?.
Lipos are lrp 5000 go them upside down its close but not enough.
What am i doing wrong???
Thanks

captainlip

06-01-2011 09:42 PM

wont go through the last part, i had this problem for hours after i cut 1cm off the clip and no in everytime no issues.

purplenut

06-01-2011 09:44 PM

Quote:

Originally Posted by captainlip (Post 449591)

wont go through the last part, i had this problem for hours after i cut 1cm off the clip and no in everytime no issues.

No i can not even get it through the first part???

steve73

06-01-2011 09:52 PM

A little bit too high with 25,1 mm?

purplenut

06-01-2011 09:54 PM

Quote:

Originally Posted by steve73 (Post 449598)

A little bit too high with 25,1 mm?

But iam sure i asked months ago if these would fit and the answer wa yes???

hide	06-01-2011 11:31 PM

I had this problem. Make sure that you have the hinge on the rear diff on the upper setting and they should fit fine.

steve73

07-01-2011 12:31 PM

Quote:

Originally Posted by purplenut (Post 449600)

But iam sure i asked months ago if these would fit and the answer wa yes???

OK, i only know the original Report and it says 25 mm: http://www.team-durango.com/blog/?p=1175

TonyM

07-01-2011 12:36 PM

Quote:

Originally Posted by hide (Post 449656)

I had this problem. Make sure that you have the hinge on the rear diff on the upper setting and they should fit fine.

Same here, once I moved to the upper setting my 5000 50C LRP's fit fine.

Mike Parker

07-01-2011 01:17 PM

Quote:

Originally Posted by purplenut (Post 449589)

Ok i for some reason can not get the long body clip through when putting the lipos in?.
Lipos are lrp 5000 go them upside down its close but not enough.
What am i doing wrong???
Thanks

I'm running GM's and found the same problem. I've put 1mm washers underneath the front mount to raise it slightly and all's good. Hope this helps :)

purplenut

07-01-2011 03:16 PM

Quote:

Originally Posted by Mike Parker (Post 449806)

I'm running GM's and found the same problem. I've put 1mm washers underneath the front mount to raise it slightly and all's good. Hope this helps :)

Funny enough I was going to try that tonight cheers

muratti

07-01-2011 03:37 PM

Can it be that you´ve got the same problem like the guys in this thread:

http://www.oople.com/forums/showthread.php?t=58264

hide	08-01-2011 01:01 AM

I know for a fact the LRP 5000mah 50C packs fit. Check out the thread Muratti posted.

Big G

08-01-2011 11:27 AM

Quote:

Originally Posted by Mike Parker (Post 449806)

I'm running GM's and found the same problem. I've put 1mm washers underneath the front mount to raise it slightly and all's good. Hope this helps :)

exactly what I did. no problem now :)

purplenut

08-01-2011 07:30 PM

Quote:

Originally Posted by muratti (Post 449863)

Can it be that you´ve got the same problem like the guys in this thread:

http://www.oople.com/forums/showthread.php?t=58264

Yep Sorted it now tho and electricts were fun to pics going on now(in show me yr)
Leon

All times are GMT. The time now is 10:40 PM.