My X2 Team Edition
 

Some picture of my X2TE
Here the certificat, I've the N° 79 of 100
http://lh3.ggpht.com/_sxeWYpX_f90/TS...MG_4919_GF.jpg
http://lh3.ggpht.com/_sxeWYpX_f90/TS...MG_4858_GF.jpg
All the differents parts when we open the box
http://lh5.ggpht.com/_sxeWYpX_f90/TS...MG_4854_GF.jpg
The front
http://lh4.ggpht.com/_sxeWYpX_f90/TS...MG_4875_GF.jpg
The diff with the motor plate with the N° of the chassi :wub
http://lh3.ggpht.com/_sxeWYpX_f90/TS...MG_4884_GF.jpg
http://lh6.ggpht.com/_sxeWYpX_f90/TS...MG_4888_GF.jpg
http://lh5.ggpht.com/_sxeWYpX_f90/TS...MG_4898_GF.jpg
The big bore rite AR
http://lh5.ggpht.com/_sxeWYpX_f90/TS...MG_4904_GF.jpg
http://lh5.ggpht.com/_sxeWYpX_f90/TS...MG_4905_GF.jpg
Soo nice
http://lh3.ggpht.com/_sxeWYpX_f90/TS...MG_4912_GF.jpg
The front
http://lh4.ggpht.com/_sxeWYpX_f90/TS...MG_4914_GF.jpg
Did you star to build your's ?

I just ordered my X2 TE today.Hope it will be at my house at the end of the week.:D

Congratulations! Good for you ben :)

The big are more pack than the normal dumper.
Like i see in the US i will use the Losi piston, but i wait my order.

Congrats, most be stoked. Are you planning on running it, if so with what electronics?

Grats...looks nice :)

Remember to run super glue around the edges of the Carbon Parts. It seals the part and will stop potential damage and makes it a little stronger. Be careful though and take your time.

J

Congratulations, I´m building mine...

Did you see that the final position of the diff nut is a little off when is finally tightend?

I will do it, but not for the picture.

For the moment thinks putt my ESC robitronic speed star 8.5, and motor 10.5 robitronic too. The ESC is a litlle bite too big soo i will look to buy the ESC 5.5 more small.

I will race with them next WE, indoor full carpet.
Yes the diff nut are a little work. Here the picture. (I don't speak very well and the translator don't translate everythink, soo if i'm rong ask me again:blush: )
http://lh3.ggpht.com/_sxeWYpX_f90/TS...MG_4877_GF.jpg

http://lh3.ggpht.com/_sxeWYpX_f90/TS...MG_4878_GF.jpg

You did it very well, that was what I asked for. I will put pictures of mine.

I would like to find a setup for big bore and the alu rear hub for an indoor race in carpet.
For the other setup i will take what i've use on the X pro, bt if you have better i take yours :lol:

I've received my X-Pro Team Edition LE no. 36 yesterday and have build it yesterday evening. Nice car, great to build and looks nice.

About 70 pictures of the building of the car can be found here:
http://www.rc-junkies.nl/news/index....edition-no-36/

http://www.rc-junkies.nl/news/wp-con...ion_le_015.jpg

http://www.rc-junkies.nl/news/wp-con...ion_le_039.jpg

http://www.rc-junkies.nl/news/wp-con...ion_le_049.jpg

http://www.rc-junkies.nl/news/wp-con...ion_le_113.jpg

Now that is a sweet looking car Bart,nice build mate.:thumbsup:

I´m building mine too ( nº 62 ) but building a Mad Rat for the little son and a X2 pro for my doughter. Now I have a tired arm ¡¡¡

I´ll post pictures soon.

Thank you! I'm very pleased with the quality of the parts and plastic; the material feels great during mounting, bit like XRay quality.

Inform me when you will do your 1st run.
Mine was in 10 days, I can't wait :drool:

If you want i do a report, but in french.
http://www.rc4ever.com/joomla/index....tion&Itemid=36

After having one of the first X-Pro's, the only real differece, performance wise is the big bore shocks, would I be right?

The whole package is well beefed up,The motor mount is great quality 10x better than the original.
I,ve yet to try the big bores..they are next on my list.Mines there apart from the flashy diff outdrives and the BB shocks.
I have the carbon towers but ive never broken a shock tower yet so ive stuck with the original ones from day one.
If i were to buy the Team Edition it would have to be a shelf job :)
DCM, i think i have whats left of your old (Tekin stickered) X-pro :)

Glad it is still going strong, did I leave the B4 stub axles on it?

I did look at the Team Car, but it didn't resolve stuff that they could of done, for such a 'special' run of kits. Alloy castor blocks don't excite me.... BB shocks are good, but they could of gone brass on the front bulkhead to get weight upfront, crush tubes for the front wheel bearings, alloy or brass rear suspension holders etc.....

yep :thumbsup:
I know what you mean about the weight up front.The Rudebits under servo weight does it for me.
Will be running mine at the Petit tomorrow ..if i get up in time :woot:.