oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Durango (http://www.oople.com/forums/forumdisplay.php?f=80)
-   -   what pinions you guys running? (http://www.oople.com/forums/showthread.php?t=60071)

captainlip 31-12-2010 05:03 PM

what pinions you guys running?
 
have a few pinions but I opted to buy a 19t pinion to keep temps down abit.

what sizes you guys running.

Big G 31-12-2010 05:44 PM

19/87 on the 7.5 has worked well so far indoors. It thermaled out on a 21 opps :D

zippy 31-12-2010 05:48 PM

hi. i run a nosram istc 7.5 v3 21 pinion with no temp problems :)

captainlip 31-12-2010 06:00 PM

cool cheers guys, nearly stuck a 23t in :blush: glad I bought the 19t i wont be running the fan on the nosram

steve73 01-01-2011 09:47 AM

21 with Tekin RS Pro and 6,5T
I ordered now 19, 20 and 22 and will see what happen with temperature and speed
(I think that the change of the pinion is too complicated at the DEX 410)

traffman 01-01-2011 05:20 PM

Happy New Year!

I run a nosram with fan , x12 , 6.5.

Standard spur with a 21 tooth .

paulc 01-01-2011 06:50 PM

Quote:

Originally Posted by Big G (Post 447354)
19/87 on the 7.5 has worked well so far indoors. It thermaled out on a 21 opps :D



19T seems abit low for a 7.5 i was running a 24T on a 7.5 no heat problems with no fans either Mainly been running a 6.5 all last year on a 22T or 23T and a ran a 5.5 on a 21T with no thermalling problems

Paul

Northy 01-01-2011 06:57 PM

Agree with Paul here - he's my hero :wub

paulc 01-01-2011 07:03 PM

:lol::lol::lol:

hide 01-01-2011 07:07 PM

I've got a 22t on my X12 6.5 with stock spur. Not run it yet though...

zippy 01-01-2011 08:46 PM

Quote:

Originally Posted by traffman (Post 447659)
Happy New Year!

I run a nosram with fan , x12 , 6.5.

Standard spur with a 21 tooth .

hi . i run a istc nosram with fan 21/standard. i run the speedo on mode 4. wot mode do you run ? cheers zip:D

James 01-01-2011 08:52 PM

I run 22/87 with a Sp V3 5.5 pretty much everywhere.

slowjun 03-01-2011 09:00 AM

Quote:

Originally Posted by steve73 (Post 447514)
21 with Tekin RS Pro and 6,5T
I ordered now 19, 20 and 22 and will see what happen with temperature and speed
(I think that the change of the pinion is too complicated at the DEX 410)


yep, similar to a B44, maybe they will release a DEX410.1 then change the motor mount similar to a B44. hahaha....

captainlip 03-01-2011 10:38 AM

ran the 19t/87spur and was fine no thermaling but the esc was very hot to tough, the motor was to but it is an x12 so expected, good job the the chassis acts as a heat sync :lol:

Big G 03-01-2011 11:49 AM

Quote:

Originally Posted by paulc (Post 447699)
19T seems abit low for a 7.5 i was running a 24T on a 7.5 no heat problems with no fans either Mainly been running a 6.5 all last year on a 22T or 23T and a ran a 5.5 on a 21T with no thermalling problems

Paul

Our indoor club nights are on a very small, low grip track where we see <9 sec laps now and then. Just can't use anymore speed.

I've been running a 10.5 for a few months now in the Cat SX there and apart from the last few feet of the straight I'm just as fast as anyone running a 6.5.

the 7.5 on a 21 pinion like I said thermaled out at 200oF so I stuck it onto the 19

Big G 04-01-2011 12:05 AM

Ran the car at Kiddy track today and it felt very undergeared on the 19t pinion. Will obviously be taking this up a few teeth when we race there again.

Northy 04-01-2011 11:08 AM

7.5 on a 19? :confused: I'd be on a 23/4 to start with I think :lol:

Big G 04-01-2011 12:05 PM

yeah I'll be on that when I go back outdoors, but for our small track the 19t keeps the temps down

freud 13-01-2011 10:48 PM

Speedo LRP SXX TC SPEC ''set up'' 1,2,2,2

Motor LRP X12 6.5 OCTA WIND 22,23/87
" " LRP X12 7.5 24,25/87

Gonzo 14-01-2011 08:53 AM

Quote:

Originally Posted by freud (Post 452280)
Speedo LRP SXX TC SPEC ''set up'' 1,2,2,2

Same speedo as master Freud
I run a CS 7.5 24T or CS 6.5 23T


All times are GMT. The time now is 06:16 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com