indoor carpet setup?
 

What springs and holes selected on the shock tower do you guys race with and find best? Thanks

Hi mate,

I raced at Broxtowe on Sunday which is mostly high grip carpet.

Shock settings were as follows:

Front = Dark Blue springs, 2 hole pistons frilled to 1.3mm, 35wt chock oil. Middle hole on shock tower and outer on wishbone.

Rear = Light Blue springs, 3 hole pistons drilled to 1.3mm, 30wt shock oil, middle hole on shock tower, middle hole on wishbone.

I tend to use the above shock set up on most tracks, very occasionally changing oil/springs depending on track conditions.

Hope this helps.

Craig