schumacher hex diff washers
 

were the hex diff washers fitted to procat diffs made only to fit the procat(mms?) diff or were they common to other models?.

They came (Schumacher ones) after the procat was launched, but I think they were gone by the time the bosscat came. I suspect they would have been used in ( or at least would fit) the cougar. I think the cougar 2 had moved onto the same design as Bosscat.

Not sure if they were used in any other models.

the bosscat and cougar2 used the tri-lobe washers which schumacher still list. i`m looking to find some of the hex drive washers and seem to remember that they were fitted to something else ?.

http://cgi.ebay.com/SCHUMACHER-U1097...item43a182f892

Here are some hex washers.

jeroen thanks for the reply,have just bought them.

Hi Brian, I found out from Dangermouse on RC10Talk that the Losi hex washers LOSA3010 fit and are more hardwearing too.

hi kazal, thanks for the part number have just found some of them on ebay, will see if they fit when they arrive and let you know.cheers

Hi Brian, I got mine already - they fit the Schumacher alloy diff halves well (maybe a tiny bit looser) and are about 0.18mm thicker.