ZX-5 aluminum parts
 

I already have the front arm brace, & shock tower mounts. But where could I find the aluminum pieces like on this ZX-5. Most importantly the rear arm holder, front c-hub & knuckles. http://cgi.ebay.com/Kyosho-Lazer-ZX-...QQcmdZViewItem

http://cgi.ebay.com/KYOSHO-LAZER-ZX5...QQcmdZViewItem

. but dont bother with the c-hub and knuckles unless u want them for show. they are cheap aluminium and bend first crash u have.

Check this site out. They got more or less all the alu. parts for the ZX-5 I think.

unless you can get good strong quality hubs in the 10 deg version then don't bother. The 7.5 kit setting is no good, and as said, the ones on ebay are terrible quality.

Hey Supah, good find & only a couple hours away from me. Do you have any experience with these parts? Good quality? Cast or billet?

jim, I bought the 10 degree hubs & I can't tell the difference at all from the 7's.

Sorry, I havent bought anything from that site yet so I dont know. But I got some of the alu parts they are selling, not sure if its the *exact* same stuff, but thats good quality.

Does anyone know for sure whether the TF-5 touring car aluminum arm braces work with the stock ZX-5 chassis? It seems to me that the best solution to the breaking arm braces problem is to use these instead. Problem is they aint cheap and I dont want to buy unless I know it's going to work.

Yes they do did it to mine

Great news mate, thanks very much.;)