liquid mask help
 

right i have a brand new jar of the bob divley stuff here and ive given a shell 5 coats of the damn stuff each time its dried before applying the next coat im doing it in thick but not so thick it laves clumps its been left over night in the airing cupboard and is ready to cut.
thing is when i cut it and go to peel it is like its only had 2 coats thinly applied not peeling properly has any one else had this problem with this brand?
i had a shell that was allready masked but was with a green masking and i found that to be a lot better but unsure of what masking that was.

steve

cant say i have ever had that problem with divleys mate, usually 4-6 good coats is more than enough, if its hard to remove and feels brittle add some more thick coats,if its hard and rubbery you may have force dried it to quick,again add another good coat it usually softens up abit after another coat,good luck let us know how u get on,

yep, like carl, never had that trouble.

as for the green masking fluid, my rcs mask is the only green liquid mask i know of, could be wrong though.

cheers lads :thumbsup:

ive allways used bob divley stuff and never had trouble before might be a bad batch?
ive given another thick coat this time see what its like tomoz

If it is a bad batch, it smells bad, like baby sick...

yep its got a really rank pong to it allright :cry:

to be fair, you would be better buying some new stuff, I had two bottles like that, and none of it worked right!

ye ive ordered some allready :thumbsup:

Have you? I've not received an email yet.. :D

lol ill be ordering it tomoz jon need other halfs card mines empty lol

check your inbox jon ;)

:wub :thumbsup:


The first batch of mask I got was ever so slightly on the thin side. I think this batch might be ever so slightly on the thick side.
If needed, you can add a tiny bit of water to get it to your required consistancy. I spray mine through a spray gun so let me know how ya get on bud. Not had anyone say about it being too thick yet though.

lol yeh if it smells bad ie baby sick it will never work had some like that my self bin it get jons stuff works a treat, and cheap,so jon do i get a cheap bottle now and some candy samples lol pm mate

What brush do you use for spraying it Jon, and how do you clean out after?

will see what i can do :woot:

mines a cheap 1.4mm and does the job ok, would be better if it was around a 1.8-2.0 i reckon though. clean with water as soon as you finish/inbetween coats.

cool im gona have a go spraying it on the next time i been using a paint brush.

1 other question jon whats the best to remove your paints cause i made a mistke on one of my shells but dont want to use nitro

i use a cheap 1mm air brush of ebay or everything airbrush .com and clean it with good old water mate works a treat can even spray it on neat no thining needed
anything above 0.5mm should be ok
http://everythingairbrush.com/acatal...SprayGuns.html

http://everythingairbrush.com/acatal..._AB_183_K.html

thanks Jon, might be something worth looking at!

my paints or the createx?

my paints, you'be lucky, they stick like....

try using you scalpel blade to scrape off. or a bit of the thinner on a cotton bud (if you had bought some :rolleyes:) :)

guess i better go wake the missus lol

if you put it in the freezer and check it every few minuets it will make it come of easy just keep checking it till it comes of easy and then let it warm up wash and re do