Losi Xcelorin Help
 

Hi, i'm having trouble setting up my Losi Xcelorin Sensored Speedo.

I'm running a B4 on mixed surfaces (indoor and out) and can't get the speedo to run properly. It cogs massively on initial acceleration and coming out of corners. The only way i've managed to stop it so far is to under gear a lot (at least 3 teeth from recommeded)

I've got 6.5 and 10.5 and the same happens for both, once undergeared it runs flawlessly, but very low top end speed because of gearing.

Does anyone use one of these? And is there a good way to set it up to stop this?

Thanks.

Have you tried a different sensor cable. Mine done the same thing after a couple of weeks owning it from new. I put a new sensor cable in and it cleared the problem.

A new sensor cable worked for me too, they are cheap as chips so I now have a spare just incase.

I run a 6.5 and its fantastic.

Have you tried updating the firmware

and turning timing up

Firmware is the latest version and i've tried 2 different sensor cables.

The timing though.. i've not changed that from stock, actually i've not changed much from stock.