Cougar SV bearing sizes??
 

When i want to swap the bearings of my Cougar SV i find out that some bearings don't have the size what's in the manual!!!

Can someone tell me what's the size from all bearings and also have a list from howmuch bearings i need per size?

I've the latest batch from the Cougar SV...

all sizes and list are online here
http://www.racing-cars.com/sp/catego...and_Balls.html

Is it possible to swap these:
U2574Ball Bearing - 5 x 9 x 2.5
for these:
U1439Ball Bearing - 5 x 9 x 3
Or does this not fit? It's just 0,5mm difference in thickness...


The full bearinglist, (excl. the full thrust bearing), for the spec2 Cougar SV must be:
5x9x3 1pc
5x9x2.5 1pc
3/16x3/8x1/8 4pcs
4x8x3 14pcs
5x10x4 4pcs
10x15x4 2pcs

This list is different than the bearing list in the original manual!!!!!

i don't know why would you even try that, just fit what supposed to be in there job done,why is the list different whats different??

I don't know why it's different, but it is...

Steering assembly in the manual:
8 pieces of U1439 (5x9x3)
but in mine car there 8 pieces of U1411 (4x8x3)

The right list what's in mine car...
26 bearings
(excluding diff thrust bearing)
U1411 - 4x8x3mm (14)
U1439 - 5x9x3mm (1)
U2574 - 5x9x2.5mm (1)
U3016 - 10x15x4mm (2)
U2148 - 5x10x4mm (4)
U3737 - 3/16x3/8" (4)

Why i asked about fitting of the U2574 bearing is that in several sets who you can buy on the www they don't have, or even heard of the U2574 version.
They deliver the U1439 2x.

Hi,
i need the help of you Shumacher experts because i need to know the size of the front wheels bearing on the SV. I tried to find the info by myself but had no success.... :blush:

I'm going to buy a couple of set of Cut Stagger Slim Yellow Pre-Glued to use on mine trf201 (i have both metric and inches front arms) but i need to know the correct bearing size.
At the moment i only have metric ones (5x10X4) are they ok or i need something else?

Thanks for your help.
Bye
WWD
:)

http://www.racing-cars.com/pp/New_Ca..._SV/U3737.html
heres your front wheel bearings there 3/16x3/8 thats inside and outside dimensions not sure the rims will fit on your trf

That's fine, thanks a lot for your answer, yes the TRF has an optional front axle to use wheels with 3/16x3/8 bearings.

Thanks again.
Bye
WWD
:)