Shark ST 1/18th
 

Hi,

I'm selling my LRP Shark ST, because I have too much cars now.
Sorry for my bad English.

You can buy the different parts separately.

Part 1

1: A complete Shark ST in parts.

2: A brand new set of front suspension arms.
3: A set of five new pivot balls. (you need only 4 for the car)
4: One right front upper suspension arm.
5: Two tires on chrome rims and two tires without rims. They are a bit crappy...
6: One extra wing mount.
7: A brand new center drive shaft
8: One used center drive shaft including spur and differential pinions.
9: A carbon front brace.
10: Buggy body mounts.
11: One used truggy body.
12: One used buggy body.
13: A blue wing set.
14: A set of blue dish wheels including tires and foam. Almost new, and not glued.
15: Some extra ball bearings (almost a complete set)
16: A set of 1/10th on-road racing tires.
17: A manual.
18: A extra set of differentials with steel outdrives.
20: A extra gear cover set.
21: A extra spur gear cover.
22: A extra set rear hubs.
23: A extra front hinge pin support holder.
24: A extra front hinge pin cover.
25: Some extra new screws.
26: Some extra used screws.
27: A brand new Atomic motor mount.
28: A used Atomic motor mount.

Part 2

1: A brand new Phat Bodies 'short course' Blackjack boddy. --> http://phatbodies.bigcartel.com/product/new-phat-bodies-sc18-blackjack

Part 3

1: A set of buggy shocks with one bladder missing and some extra springs. (good as spare parts for your current shock set)
2: A buggy manual.

Part 4

1: A Graupner GM Genius 30R 1/18th esc. It can take some heavy motors, but is also a bit bigger so I would recommend to use it in a Shark.
It comes with the program card and manual. The ESC came loose of its holder, so now it can slide freely. A bit of CA glue will solve that problem.

Part 5

1: A Xcelorin 1/18th 7400kv brushless motor. In good condition including the original packaging and manual etc.

Part 6

1: A Turnigy 1600mah Lipo. Fits perfect in the Shark. Hasn't been used for some time, but hasn't had more than 10 cycles.

You can make me an offer, and tomorrow I will add some prices.

Pictures:

http://lh6.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5211.JPG

http://lh6.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5184.JPG

http://lh5.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_4920.JPG

http://lh6.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_4935.JPG

http://lh6.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_4944.JPG

http://lh3.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_4958.JPG

http://lh6.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_4975.JPG

http://lh3.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5076.JPG

http://lh6.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5086.JPG

http://lh6.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5105.JPG

http://lh4.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5120.JPG

http://lh3.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5141.JPG

http://lh6.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5193.JPG

http://lh4.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5116.JPG

http://lh5.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5166.JPG

http://lh3.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5172.JPG

http://lh5.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_4933.JPG

http://lh4.ggpht.com/_vJhYWbwUaoI/TJ...0/IMG_5151.JPG

More pictures here: http://picasaweb.google.com/109966642794668592736/ForSale#

P.S. I live in Belgium but I can ship it to England.

Greetings, Ward