oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Yokomo (http://www.oople.com/forums/forumdisplay.php?f=21)
-   -   big bore rebuild kits? (http://www.oople.com/forums/showthread.php?t=55706)

09 lex 250 17-10-2010 02:14 AM

big bore rebuild kits?
 
wanna know if therecare any rebuild kits available for the big bores? been using mine for awhile now and its def time for a rebuild!!

also do they sell these shock shafts seprate?


thanks in advance!!

CODMAN 17-10-2010 02:31 AM

Lex, the parts inside the Bigbore cartridge are the same as the regular shocks. I don't know if they sell complete rebuild sets for these... But I know you can get the parts separately as well as the o-rings... Check out the Yokomo site for complete parts lists (or better yet the manual).

Hope this helps a bit!:thumbsup:

Quote:

Originally Posted by 09 lex 250 (Post 424002)
wanna know if therecare any rebuild kits available for the big bores? been using mine for awhile now and its def time for a rebuild!!

also do they sell these shock shafts seprate?


thanks in advance!!


09 lex 250 17-10-2010 03:41 AM

is it the 49.6 mm or the 40.7 mm?

thanks cod i appreciate the help!!

CODMAN 17-10-2010 01:56 PM

Lex, from what I know, the 40.7mm is the front YS-5S-2T and the 49.6mm is the rear YS-5L-2T. They come in sets of two (which isn't a bad thing...).
http://www.rc-race-and-drift-japan.c...oducts_id=2309

Quote:

Originally Posted by 09 lex 250 (Post 424004)
is it the 49.6 mm or the 40.7 mm?

thanks cod i appreciate the help!!


09 lex 250 17-10-2010 03:01 PM

ok thats what i thought thank you again!!


All times are GMT. The time now is 08:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com