oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   For Sale (http://www.oople.com/forums/forumdisplay.php?f=6)
-   -   CAT SX Carbon Fibre Phil Booth built LiPo Signature version (http://www.oople.com/forums/showthread.php?t=55668)

Itie RC 16-10-2010 04:00 PM

CAT SX Carbon Fibre Phil Booth built LiPo Signature version
 
Hi,

I have a CAT SX Carbon Fibre Phil Booth built LiPo Signature version for sale with the following Hop Ups:

Front & Rear Roll Bars Sets
Alloy Upper Rear Transmission Housing (which allows the Rear Shock Conversion to be fitted)
Alloy Upper Front Transmission Housing
Alloy Front Yokes - 7.5 Deg
Alloy Rear Hubs - 1 Deg
BW Racing CAT SX Layshaft (to fit Team Associated Spur Gears)
Team Associated 81T Spur Gear
CAT SX 2 Front Wishbones
CAT SX 2 Rear Wishbones
CAT SX 2 Wing

Becasue the car started life as an SX Phil Booth built version, not an SX2, it also has all the standard alloys bits on it too, (bearing housings, steering, etc) including purple titanium turnbuckles (not the weak gold ones). Have also just put a brand new set of wheels and tyres on the car. Tyres are Schumacher Yellow Mini Spikes with Shcumacher green inserts.

It's been run for the summer season at my local club, which basically means between 10 - 15 meetings, so is in very good condition, as you can see from the pics, see link below:

http://picasaweb.google.co.uk/joedii...natureVersion#

Comes with original box, manual and the following spares: (some spares are new, some have already been used and replaced with Hop Ups)

Spare Body - Windows masked, ready for painting
Washers & Pins for wheels including HEX conversions for front wheels
Speed Pack - Various O Rings
Speed Pack - M3 Cap Head Screws
Speed Pack - Short M3, Cap Head Screws
Speed Pack - M3 Button Head Screws
Speed Pack - M2.5 Screws
Front Yokes - Plastic x 2
Rear Hub - Plastic x 1
Front Upper Transmission Housing - Plastic
Rear Upper Transmission Housing - Plastic
Pivot Pin, Threaded 1/8 x 50mm x 2
Rear Shcok Pistons - 3 Hole x 2
Ball Grippa Sockets - lots
Front Wishbones - CAT SX x 4
Rear Wishbones - CAT SX x 3
M4 Nyloc Wheel Nut - Silver x 4
M4 Nyloc Wheel Nut - Purple x 4
Purple Titanium Turnbuckle - 53mm x 1
Diff Output - Male x 1
Wing Mount Parts - Various
Spur Slipper Gear - CNC 81T
Spur Slipper Gear Pads x 2
CAT SX Layshaft
CAT SX Wing

£175 ono + £8.96 Postage (1st Class Recorded)

Cheers
Joe


All times are GMT. The time now is 07:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com