xxx-CR
 

Hello

Ive been wanting to try somethign new for a while now so now i have the cash ive decided to run full losi cars next year after a bit of persuation by stan the man!!!! lol its ace calling him that.

So i just want to know what brakes what upgrades should i get??? Anything i should do to it to make it handel better etc. Also what is with the brass bulkheads i dont know how many people run them but i know sleigh did is there a reason for that other than strength also where do you get them from??? Anything else i need to know??? Also can anyone suggest me a good starting setup for a grass track like Oswestry

A

Anybody ideally want to order tomorow all help apreciated :(:(:(

A

Stan's car was a std car at the F3's! So just order the kit & spare whishbones, shock towers, rear pivot plate, rear pivot support, hubs & gear box case. That should do for spares then you just need springs & pistons.
Theres some good setups on here if you look around. as for the brass bulkhead they were made by PW so you would have to ask him! not many people had them.

ash have loads of spares let over from when we ran the xxxcr

So far ive got in my cart on losi parts house

CR kit
Ive got 2 pairs of rear wheels (carl ill have two pairs of fronts to lighten your load a bit)
Front Shock tower
Front arms
Front spindles and carriers
Rear shock tower
Rear pivot block
Rear arms
Red rear spring
Pink rear spring
Black front spring
Blue front spring
Green front spring
Pivot block front which i assume is front bulkhead
A pair of titanium ballstuds for rear tower stop them bending or snapping.
And some grey ballstuds

Oh and most importantf all a black losi t-shirt.

Anythign else???


A

ash im suprised you've gone losi, would have thought B4 & D4 would be your 2008 drive's eh phil ;) :D

Whats phils drive got to do with me ???

A:wtf:

Yeah just a groveling letter to the customs officers not to sting you too hard on a parcel that big.

So much for supporting your local hobby stores, which you claim to do.

Nah Stan goes down Osfest ;)

Im not copying stan he sent me this PM the other day tittled : Stan is god :D

-PM removed-

Im just getting a few bits from losi parts house now carl is sorting me out with spares one of my local shops.

A

If customs hit you on that, must be what, $270 at least, add 17.5% vat thats £25 at least and then parcelforce, could be a £45 charge on it, minimum.

Cant wait now just cant decide about what shell to get. im not to keen on the std cr one.

A

........:o

O Ash Stan is God in his world :rolleyes:

Thanks for all your help now ive just got to order it tommorow or tuesday night when ever i can be bothere or find time to go to the bank to put my moneys in. Then wait for mr post man and and then build it.

A

Coming soon to the For Sale section.... World Championship winning AE B4......


Good luck with the Losi 2WD... just remember it's not always the car that improves the results, its the practice, practice, practice.

As for the spares you need for the CR, I'd only say you'll need Diff rebuild kits (thrust & main plates) and front wishbones.

Thanks for the help phil i wish you all the luck with your b4 and d4.

Yea ive got a good reason now to practise more as i can practise with the new car and try to get used to it and to do some testing so in the process im also practsing.

Do you have to rebuild the diff alot??

A

This is a personal thing, but I heated the CR diff and I mean HATED....

In the end I opted to run a XX-4 steel diff in mine.

The main problem I found was the combination of the "brass" slip ring and the main diff ring produced to much slip unless you boll***ed it up tight. And I thought that the main diff plate was too thin and therefore "soft". I ended up replacing them quite regularly.

Try it and see how you get on.... then either try the XX4 steel diff, or simply dremel a flat on the CR diff halves and use the XX4 diff plates.

Oh cool i might do that straight away. Save encountering diff problems in the middle of a meeting that would bea nightmare xx4 diff rings it is. How long did you drive for losi for phil?

A

Actually ive got a set of xx4 outdrives you give me phil would they work with xx4 diff rings then the cr hardware like the screw thrut race and the diff gear??

A