Brushless CRT.5 + And + Brushless X1-CRT
 

1st up the X1-CRT brushless
roller with the conversion kit i am after £120 (one shell is included)
I'm after £100 for the mamba monster system, i think the motor needs rethreadlocking as the shaft moves when the motor gets hot although last time i used the car it was fine so who knows. The esc case is broken (the lugs don't secure the case properly) but if it is ziptied down then it's fine. - £100
Innovative Rc hopups BNIP - £40
http://i136.photobucket.com/albums/q...T/IMGP4804.jpg
The other shells are £10 each
From the spares i am going to try and make another nitro roller which i want £70 for :thumbsup:

Pictures:
http://s136.photobucket.com/albums/q...hmerebear/CRT/
http://i136.photobucket.com/albums/q...T/IMGP3174.jpg

CRT.5 brushless - Mamba max and medusa 50mm 4800kv motor hitec 645mg steering servo. All in good condition with the electrics like new all that needed to complete is a radio system (i can include a cheap 27mhz set for £15 extra)
http://i136.photobucket.com/albums/q...i/HPIM0835.jpg
£200 or £240 including 2 2s hardcase batteries
Pictures:
http://s136.photobucket.com/albums/q...ar/CRT%20mini/