Wire from ESC, Help!!!
 

Hello!

Just got a used Novak GTB for my Dex410. But the battery wires are to short. So i am going to buy new ones. But i have no Idea how many mm(2
the wires is.

Please help me what gauge/mm(2) is the wires?, for a 1:10 speed controller....

//Jakob

"sorry for my bad enlish"

Hi,

The stock wire on the GTB is 14ga, something like this:

http://mediacdn.shopatron.com/media/...jpg?1104356866

http://www.shopatron.com/products/pr...5508/135.0.1.1

MiCk B. :-)

If all you can find is mm2 wire, 2.5mm2 is about right.

I use 12 gauge wire for my ESCs. Wentzels, Roffes should most probably have wires in stock. I use Novak wires.

There is an advantage with RC wires over regular electric wires, they are softer.

Just have a search on ebay for 12 or 14 gauge silicon wire. That's the stuff you're after (I use 12 gauge on the power wires on my ESC and 14 gauge off to the motor).

..
 

Thanks guys for all your responses!

//Jakob