Reversing Channels
 

Hi Guys

A member of the club has a old procat that bellonged to his brother he is just starting up he bought the procat down there where a few drivechain issue's so Phil C very kindly adapted it to 2wd only and did some work to tidy it up but we are having one issue. The channels are reversed when you put the throttle stick back it goes forwards and push it forwards you get reverse. Turn the steerign stick right it goes left and stick left turns right. There are no reverse switches on the transmitter that is an old acoms set speedo is hitec and reciever acoms also. Pictures below..

http://img535.imageshack.us/img535/6409/img0472r.jpg

Uploaded with ImageShack.us

http://img534.imageshack.us/img534/3290/img0474q.jpg

Uploaded with ImageShack.us

Any idea's anyone help

Ash

cant remember how we use to do it i think there in the back were the battery's are if not undo the 4 screws and turn through 180

Yep unscrew the sticks from the front (the four screws) and put them back 180 degrees from where they are now.