sparrowhalk xt brushless chassis
 

as above brought a thunder tiger xt, then added 5800kv dynamite fuse, ezrun esc, power hd dig servo... made this chassis & lipo holder up as didn't like the general layout and this one allows me to use 4000 11.v fightmax's

before:
http://www.hobbymedia.it/img/2009/03...t-truggy-8.jpg

after: click to enlarge

http://i72.photobucket.com/albums/i1...0062010045.jpg
http://i72.photobucket.com/albums/i1...0062010044.jpg
http://i72.photobucket.com/albums/i1...0062010043.jpg
http://i72.photobucket.com/albums/i1...0062010042.jpg
http://i72.photobucket.com/albums/i1...0062010041.jpg
http://i72.photobucket.com/albums/i1...4062010035.jpg

5800Kv on 3s? No way... That's more than 70,000 rpm unloaded on a full pack. Your motor WILL explode.



p.s.

It's Flightmax :)

Jon

64380... gets hot but not hot enuff too touch... on its limits tho

4.2v per cell fully charged. Or 12.6v. 12.6x5800=73,080 rpm.:bored:

fair enuff... runs fine tho

Huh....

Well, I guess just don't expect it to last that long. Make sure you lubricate your (motor) bearings frequently.

it doesn't even got too hot too touch... and ok cheers for the tip

http://www.rcpitstop.co.uk/dynamite-...3736-202-p.asp

even on the specs its says it can handle 2/3 cell lipo