B44 wheels nuts
 

What wheel nuts do you guys use. i noticed on my b44 that the thread doesnt come through the nylock ring on the nut ??? Normal ?? Is my wheel likely to fall off ?

Just noticed on the front thats all

cheers

You need to use the AE low profile wheel nuts, btw you get 3 in a pack.

Dms have them in stock :thumbsup:

it's normal for it not to come all the way through. put the nut onto the thread without a wheel on and do it up so it cuts the nylon. Since I did that (after a tip in another thread) I haven't had any problems with them coming off in races

I wonder why only 3 in a pack - I thought I'd got a faulty packet!

must make these some of the most expensive nylocs around at £1 each...!

buy these then
http://www.m-k-racing.com/product_in...7&%3CosCsid%3E

They are 4 40, won't do. Need to be 5 40.

http://www.m-k-racing.com/product_in...oducts_id=7551

Any good?

According to my manual they are 8 32.

http://www.m-k-racing.com/product_in...oducts_id=7538

or

http://www.m-k-racing.com/product_in...oducts_id=6701