oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Atomic Carbon (http://www.oople.com/forums/forumdisplay.php?f=19)
-   -   My Setup from RHR This weekend (http://www.oople.com/forums/showthread.php?t=45984)

Danny McGee 10-05-2010 11:54 AM
My Setup from RHR This weekend
 
2wd was as follows.
Front
Oil – 35
Piston – Red
Spring – Black
No Limiters, unscrewed 2 turns
DM Tower, inside hole
Outside on wishbone
2-B with 3 gold washers

Rear
Oil -27.5
Piston – Red
Spring – Pink (no Paint)
No limiters
Inside on tower
Old style rear end with 1degree hubs. So 4 deg in total
Extra hole drilled in wishbone on inside or inner hole.
Cut off the outside hole of the old style wishbones and use inner hole
A on 1deg hub
Short Wheel base
2 on the tower camber link

Weight
Rude Bits, T plate, Under battery plate, Battery Straps, under servo plate (thin) brass bulkhead

Tyres: Yellow SPIKES half hard foam in front and heard rear foam both losi

Motor Losi 7.5 geared 23/78

Speedo – Mamba with CHEAT set to 12,000 to 15,000.

Cheers

Danny

Mossy 10-05-2010 11:58 AM
Quote:
Originally Posted by Danny McGee (Post 375478)
2wd was as follows.

Tyres: Yellow SPIKES half hard foam in front and heard rear foam both losi
Told you every leg you had the wrong tyres on mate :thumbsup:

Nick 10-05-2010 12:19 PM
Quote:
Originally Posted by Danny McGee (Post 375478)
2wd was as follows.
Front
Oil – 35
Piston – Red
Spring – Black
No Limiters, unscrewed 2 turns
DM Tower, inside hole
Outside on wishbone
2-B with 3 gold washers

Rear
Oil -27.5
Piston – Red
Spring – Pink (no Paint)
No limiters
Inside on tower
Old style rear end with 1degree hubs. So 4 deg in total
Extra hole drilled in wishbone on inside or inner hole.
Cut off the outside hole of the old style wishbones and use inner hole
A on 1deg hub
Short Wheel base
2 on the tower camber link

Weight
Rude Bits, T plate, Under battery plate, Battery Straps, under servo plate (thin) brass bulkhead

Tyres: Yellow SPIKES half hard foam in front and heard rear foam both losi

Motor Losi 7.5 geared 23/78

Speedo – Mamba with CHEAT set to 12,000 to 15,000.

Cheers

Danny
did you run the CR or old pivot block Danny? Ps gearbox cases should be done early next week

Danny McGee 10-05-2010 12:21 PM
Quote:
Originally Posted by Nick (Post 375485)
did you run the CR or old pivot block Danny? Ps gearbox cases should be done early next week
CR Pivot Block, Sorry forgot to mention that one :).

Danny McGee 10-05-2010 12:23 PM
Quote:
Originally Posted by Mossy (Post 375479)
Told you every leg you had the wrong tyres on mate :thumbsup:
I hope you run the WRONG tyres at EPR too :) :thumbsup:

Donutt 10-05-2010 01:08 PM
Danny - how much timing were you running with the Mamba in CHEAT mode?

V-Rossi 10-05-2010 01:20 PM
Quote:
Originally Posted by Danny McGee (Post 375486)
CR Pivot Block, Sorry forgot to mention that one :).
Did you have a go with the XXX rear end as well?

Congrats btw :)

Danny McGee 10-05-2010 02:37 PM
Quote:
Originally Posted by Donutt (Post 375508)
Danny - how much timing were you running with the Mamba in CHEAT mode?
It was 26 Degree's for the first 3 rounds and then i went onto 30 for the rest of the day. I will be sticking with 30 from now on i think. Going up didnt have any bad affects through the infield, it just went faster down the straight :).

Danny

Danny McGee 10-05-2010 02:39 PM
Quote:
Originally Posted by V-Rossi (Post 375514)
Did you have a go with the XXX rear end as well?

Congrats btw :)
I didnt get a chance to no. It started off the day wet so we didnt really have much chance. I may give it a go at eden park but only if the track is dry.

My car was very good at Eden Park last time so i may not try it at all yet. :) I will give it a go before soon, just in case its amazing :thumbsup:

DaHomie 10-05-2010 02:45 PM
Hi Danny, what is the DM Tower?

DaHomie 10-05-2010 02:46 PM
...And can you confirm if the 1-degree hubs you used was the LOSA9806 ones?

Danny McGee 10-05-2010 03:38 PM
Quote:
Originally Posted by DaHomie (Post 375537)
Hi Danny, what is the DM Tower?
Ah right sorry. Its my tower that Johnathon did for me. Its basically 2.5 and 3.5 on the tower that you have. Im not too sure if he sells the tower yet but im sure it wont harm in asking him :)

And yes LOSA9806 is the hubs that i used

Freakypen 10-05-2010 07:05 PM
Well done Mr. Magee!! :thumbsup:

Rob_B 10-05-2010 07:23 PM
Any chance of your 4wd setup please danny?

Danny McGee 11-05-2010 06:29 AM
Quote:
Originally Posted by Rob_B (Post 375659)
Any chance of your 4wd setup please danny?
Honestly from the weekend, I didnt get a 4wd setup. I can let you knoe the setip that i will be using at Eden Park if thats any good? But i wouldnt want to lead people down the garden path with the one i had in the finals

Let me know and i can get it sorted

Danny

Rob_B 11-05-2010 07:38 PM
Quote:
Originally Posted by Danny McGee (Post 375783)
Honestly from the weekend, I didnt get a 4wd setup. I can let you knoe the setip that i will be using at Eden Park if thats any good? But i wouldnt want to lead people down the garden path with the one i had in the finals

Let me know and i can get it sorted

Danny
Yes if you dont mind. Thanks

mikeyscott 08-06-2010 02:11 PM
What's the ratio of the CR2 gear box?

flipside 15-06-2010 08:26 AM
Quote:
Originally Posted by mikeyscott (Post 384564)
What's the ratio of the CR2 gear box?
Same as the CR, 2.43.


All times are GMT. The time now is 04:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com