TAMIYA SPRINGS TRF511/501X specs
 

can someone help me

what are the specs of the frond + rear springs TRF511

what are the hard and soft They have different colors

can someone help me whit the specs of the spring kit

is there a list or something from the springs

Thanks guys

cheers marco

Have a look at the link in this post http://www.oople.com/forums/showpost...32&postcount=5

What you're after should be in there :D

Blue = Hard

Yellow = Medium

Red = Soft

I think the Petit RC spring chart has some measured rates - http://www.petitrc.com/reglages/BuggySpringChart.pdf

They springs aren't particularly stiff, I think the blue's are roughly equivalent to AE silvers, yellows are like AE greens, reds are like AE blacks.

Spring rates are as follows,

Front,

Tamiya Red dot = 3.17 Associated black = 3.2
Tamiya Yellow dot = 3.58 Associated green = 3.5
Tamiya Blue dot = 3.8 Associated silver = 3.8

Rear

Tamiya Red dot = 1.77 Associated black = 1.74
Tamiya Yellow dot = 1.84 Associated green = 1.9
Tamiya Blue dot = 2.02 Associated silver = 2.1

Thanks guys

cheers marco

just wondering if it was possible to run ae springs on tamiya shocks?are the correct diameter,length?:confused:

Work fine on mine.. I have AE blue springs on the front shocks. If anything they fit a tad better as the Tamiya ones rub a little I find.

cool.cheers:thumbsup:

Thoughtyou guys would appreciate this list, it's grouped by manufacturer

http://www.bigbigplanet.com/rccars/r...ad_springs.php
Steve

+1 I run AE Blues on the front too as I wanted something a bit harder up there, they fit great! :thumbsup:

just a quick question to those of you running AE Blue front springs, what rear springs are you running?

AE Silver on the rear seems to work for me

Silver on rear but try silver fronts and green rears. I find this to work very well on most surfaces...

thanks for the responses guys