AMB transponder
 

Hi All

The wires coming out of my AMB transponder have broken off at the point of entry of the transponder itself, does anyone know where i can get the wires replaced? or how invovled is it to do it yourself?

Thanks for your help in advance :thumbsup:

the wires can be replaced i have done loads for customers, you need to carefully cut open the end where the wire goes in so it can be reglued i normally cut along the long side and the 2 short sides then it hinges then join the new wire to the existing wires in the transponder and test if alls ok drop a small amount of super glue in then place in a vice to dry.