novak smart tray
 

hi all as it says really im after one of the above with the 240v lead cheers

got one comin up in bout 2 months!
but only 12 volt maplin sell the transformers

Shane, Losi Parts House sell them, thats where i got mine.

u got a web site m8 as need 1 asap

Yes i do.

http://www.losipartshouse.com/servlet/StoreFront

Only takes 4-5 days shipping.

just looked m8 none in stock gutted as its a good price aswell also u still got yours m8 as you have your muchmore

It will be here tomorrow. I discharge on the MuchMore then i'll equalise on the Novak.

E-mail losi parts house and he will try and get you one.

I have 2 in stock, see link:
http://www.m-k-racing.com/product_in...oducts_id=1173

http://cgi.ebay.co.uk/Novak-Smart-Tr...QQcmdZViewItem

Any good for you?

Just spotted this and was about to post it!

thats the old version the "se" has better options

Doesn't it just hold the cells at 0.9v? And it's cheaper in the US

old one cuts off at set voltage, .1 to .9 SE will hold em at .1 to .9 or cut off like old unit, does other bits too

The Smart Tray SE Discharger is the ultimate battery maintenance equalizing system. In addition to all of the features found in the original Smart Tray (#4500), the Smart Tray SE (#4510) now contains new sights and sounds, an optional Hold Discharge Voltage Mode, as well as a higher voltage cut-off threshold.
Among the more noticeable enhancements found in the Smart Tray SE are its new sights and sounds. Cool blue LEDs, located beneath each cell, indicate the discharge status of each cell/battery pack. Accompanying the LEDs is a buzzer that will emit a short tone to indicate when the individual cell is discharged, and a long tone to indicate when the entire pack is discharged.
In addition to our standard mode, we’ve added an optional Hold Discharge Voltage Mode. In essence, whatever discharge voltage is selected, the Smart Tray SE will constantly monitor and hold each cell at the selected voltage. The Maximum Cut-Off Threshold has also been increased in the Smart Tray SE. In both the standard and the new Hold Discharge Voltage Mode, users can now choose from 0.0V to1.2V in 0.1 volt increments.
At the core of the Smart Tray SE is Novak’s exclusive Individual Cell Monitoring Circuitry (ICM). This sophisticated circuitry is microprocessor-controlled, which enables the Smart Tray SE to provide the highest degree of care and accuracy for all Ni-MH and Ni-Cd cells—especially for today's new breed of Ni-MH cells. The ICM Circuitry accurately discharges and monitors each individual cell’s voltage, and has an LED at each cell that indicates its discharge status. A user-programmable cut-off voltage is constantly displayed on a large easy-to-read 2-digit LED. Once the cut-off voltage of the individual cell is reached, the Smart Tray SE automatically stops discharging that cell (indicated by its LED going out), and subsequently eliminates the need to monitor the pack. When all the LEDs are out, the pack is discharged and equalized.
With each cell receiving individual care and attention, users can set it and forget it without worrying about damaging the batteries left in the discharge tray too long. A large heat sink provides ample cooling for discharge components, while a Lexan cover protects the electronics.

For information regarding Novak's recommended battery care, click here.

Nice one mate.:) Mine hasn't arrived yet so not had a chance to play around with one.

$225 for a b4ft:cool:

Whats that got to do with a smart ray?:eh?: :D

or even a smart TRAY? :D :p ;)

Oops!:D