oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Bedfordshire RC Model Car Club (http://www.oople.com/forums/forumdisplay.php?f=83)
-   -   1/18th not fast enough (http://www.oople.com/forums/showthread.php?t=44976)

craig smith 25-04-2010 11:54 PM

1/18th not fast enough
 
i bought a second hand novak brushless system with 13.5 motor and im running a 10 tooth pinion and 49 spur but it to slow standard cars are flying past can anyone suggest a better gearing system or something to increase the speak
thanks guys all advice appretiated
craig

Smartalec 26-04-2010 05:11 AM

Quote:

Originally Posted by craig smith (Post 370556)
i bought a second hand novak brushless system with 13.5 motor and im running a 10 tooth pinion and 49 spur but it to slow standard cars are flying past can anyone suggest a better gearing system or something to increase the speak
thanks guys all advice appretiated
craig

Craig try going up to an 11 pinion but to be honest a 10 or 11 is what most people run on the Mongoose so if that's not fast enough i'd suggest there was something wrong with either the motor or the speedo. These things are normally rapid with that sort of gearing :)

frogger 26-04-2010 08:00 AM

With a 13.5 you could even run a 12t pinion or keep the 10 and go back to your 45 spur. What size wheels are you running? As Alec says, if it's not quick then there could be something wrong with it. People are making national A finals with 13.5 motors so they are plenty fast.

JonMack 26-04-2010 08:22 AM

If standard cars are going past you easily then there's something wrong with the motor. As Carl said, with the right gearing on a 13.5 you can make a national A final, so you shouldn't be having that problem. Check your drivetrain is running freely, first things i'd check are diffs and central drive shaft, if they're fine then check the hub bearings to see if they're running freely. If that's all okay then I'd say there's something wrong with the motor.

Ross 26-04-2010 09:51 AM

Quote:

Originally Posted by craig smith (Post 370556)
i bought a second hand novak brushless system with 13.5 motor and im running a 10 tooth pinion and 49 spur but it to slow standard cars are flying past can anyone suggest a better gearing system or something to increase the speak
thanks guys all advice appretiated
craig

Craig, as said previously,try the 11/49,that's what i run with it and it was fine :confused:.

jim76 26-04-2010 01:32 PM

obviously you have set up the end points on your speedo to match your transmitter? And you don;t have the EPA turned down on your transmitter?

if all that is fine, then check the drivetrain to make sure it is free. If you are running small foams then you can probably go to 11/45 or 12/49. If you are on full fat foams or rally blocks then you would need to drop down a bit.

craig smith 27-04-2010 09:54 PM

lack of speed
 
thanks for all your reply's ill check all the drive train its currently running 11/49 and schumacher narrow miny pins
cheers guys

craig smith 27-04-2010 10:00 PM

one of you mentioned setting it up to my transmitter it was set up to ross's transmitter who previously owned it but i havnt set it up to my transmitter could this be the problem :thumbsup:

rocketrob 28-04-2010 01:12 AM

Quote:

Originally Posted by craig smith (Post 371355)
one of you mentioned setting it up to my transmitter it was set up to ross's transmitter who previously owned it but i havnt set it up to my transmitter could this be the problem :thumbsup:

unless you suspect, and are able to confirm, the ESC has a "mind reading" (or self-setting) function ;)

raretomo 28-04-2010 01:27 AM

whats about your batteries? everything could be fine! but rubbish batteries would certainly affect your speed

leeleefocus 28-04-2010 08:50 AM

Quote:

Originally Posted by craig smith (Post 371355)
one of you mentioned setting it up to my transmitter it was set up to ross's transmitter who previously owned it but i havnt set it up to my transmitter could this be the problem :thumbsup:

It's likely that this is atleast part of the problem.

craig smith 07-05-2010 10:05 PM

just like to say thanks for all your help guys car now stonking along set the controller to the speedo and away it went stupid me thanks once again

Ross 08-05-2010 08:39 AM

Glad you've sorted it mate :thumbsup::thumbsup:


All times are GMT. The time now is 07:39 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com