oOple.com Forums - Core RC Titanium Ball Studs

oOple.com Forums (http://www.oople.com/forums/index.php)

- Schumacher (http://www.oople.com/forums/forumdisplay.php?f=46)

- - Core RC Titanium Ball Studs - Cat SX (http://www.oople.com/forums/showthread.php?t=43935)

mikeyscott

09-04-2010 08:17 AM

Core RC Titanium Ball Studs - Cat SX

Which lengths are people using?

I've found they're a much nicer fit than the standard ones so was going to look at replacing them on the car.

Anyone else using them?

ian_r

15-04-2010 03:18 PM

I would also like to use these in my Mi4 as I prefer the 2mm hex fitting, however they are no longer available from Schumacher (discontinued due to lack of popularity). I've been unsucessful in finding anyone with the long ones in stock!

Regards
Ian

PsycoChris

16-04-2010 01:27 PM

I use the core RC ones, Standard size of the stock ball studs. In the arms to hold the shock eye. I use a long stud so they dont rip out as easy.

mikeyscott

16-04-2010 01:29 PM

Is that the CR017 part number as there are three.

Ultra short, short and long I think.

PsycoChris

16-04-2010 01:43 PM

Quote:

Originally Posted by mikeyscott (Post 367631)

Is that the CR017 part number as there are three.

Ultra short, short and long I think.

CR018 is what I used. And for the arms, I have used the Losi Titanium ones. They are a little longer.

mikeyscott

16-04-2010 02:10 PM

Quote:

Originally Posted by PsycoChris (Post 367640)

CR018 is what I used. And for the arms, I have used the Losi Titanium ones. They are a little longer.

Cool I'll order a pack for the front out camber studs etc.

All times are GMT. The time now is 07:23 PM.