Droop Restrictor
 

Sorry if i'm being thick, but i'm new to this, but i would like to add 2mm of droop in the front shocks. How do i do this? Cheers

That removes droop. The question asked is how to ADD 2mm of droop. The only way I can see is to get longer shock rod ends. You can unscrew the current ones but then you run the risk of there not being enough shock shaft in the rod end and it getting pulled off.

yeah sorry did not read it right! i think you might have problems with drive shafts coming out if you do this though!

Yeh you cannot increase the front droop as standard. The only way to do this is by undoing the ball cup a few turns as mentioned previously.

Not sure why you would want any more droop at the front as theres plenty anyway? Here in the UK we actually reduce the front by 2 or 3mm, which keeps the front more stable and easier to drive.

Craig Collinson

How does it make the car easier to drive? Would you put the droop in for both indoor and outdoor?

It just stops the front end lifting so much under power then hitting the ground under hard breaking, which can give you an inconsistent feel to the car.

Restricting front droop also reduces on power steering making the car want to straighten up under power, again making it easier to drive. (A car with slight understeer is easier to drive than a car with oversteer).

Outdoors you maybe want a little more droop than indoors, but this all depends on how bumpy the track is. The car with no limiters in the front shocks has more than enough travel for any outdoor track in my opinion. :thumbsup:

Craig Collinson

So if you add 2mm or not isn't really based on which springs/oil then (at the moment for me stock springs and 30 oil) or even if you have the roll bar in or not?

Springs/oils and roll bars all effect how much oversteer/understeer your car will have as does the amount of droop. You need to get a balance between all if possible.

Its a case of trial an error, i would leave your settings as they are and try a 2mm spacer in your front shocks. You can see for yourself what effect this has, then work from there.

Hope this helps.

Crackin :thumbsup:

Thanks to everyone for their input on this, i tried taking 2mm of droop off last night and it made a huge difference to the handling of my car ,especially coming out of corners on power, it was far more stable and predictable :D:D Once again thanks.

I think I'm going to try this too as my durango is a bit of a monster coming out of the conners, handles v well otherwise and turns in nicely.

As craig stays oversteer :cry: understeer :thumbsup: