On Power steering
 

Hi Can anybody help me with the car (x-6 sq) we have a high bite track and I don't have any on power steering what could i do :confused::(

E-Speed hangars at the rear and try a brass front bulk head to keep the nose down to get some more steering on power.

One of the team lads will help you out with this but ive asked same questions. I was told this relates to what shims you use under the front camber links. How many do you run? This will help the team guys advice you.


Chris

Assuming the rest of the setup is ball park and this is a fundamental lack of power on steering, then front weight and E speed hangars low would be my two immediate changes. What weight do you have in and do you have the hangers?

Hi thank for the help my car is stock std out of the box:D I don't have any hanger

would the E speed hangers be any use on a B4 or is a complete different thing?

Hi Chris I don't have any shims in the frt camber links:thumbsup:

They will only be any use on an X6, they fit to the rear bulkhead which is totally different between the B4 and X6......

On the 2 set up sheets Ellis stafford sent me it uses 2mm shims under camber link outdoor and 4mm indoor. Try that??


Chris

And no weight?

If so weight is the very first thing you need to add at the front, but (and it's easy for me to say this I know) the E Speed hangars come a close second. If you run on any Euro type (not dirt or clay) indoor or outdoor track they are a worthy investment!

3 gear tranny ;) I use it in my squared, and have good on power steering on high bite indoor tracks.