spaz stix paint
 

Hi All

I'm going to airbrush my next shell using Spaz Stix paints and i have a few questions to ask - whats the best PSI to use? and can i get away with a 0.5mm nozzle? also what's the best thinners to use to clean up the airbrush? can i use cellilose?

Thanks for your help in advance
Cheers Paul

you can use 0.5mm, but 0.3mm would be better, and a low PSI setting, 15psi I think.

I use brake cleaner and then airbrush cleaner, as I use it so little.

i spray it using a 0.5mm iwata at about 15-20 psi and use acetone to clean after,dont use it alot though,

too bloody expensive for starters!!

£110 from ebay

Cheers guys for your help :thumbsup: