oOple.com Forums - Long reach 5/64 or 2mm hex driver

oOple.com Forums (http://www.oople.com/forums/index.php)

- General Race Chat (http://www.oople.com/forums/forumdisplay.php?f=8)

- - Long reach 5/64 or 2mm hex driver (http://www.oople.com/forums/showthread.php?t=40347)

Big G

18-02-2010 09:45 PM

Long reach 5/64 or 2mm hex driver

Looking for a long hex driver to access motor screws on the B44 without all the farce of moving turn buckles and driveshafts out of the way.

any links?

chris68nufc

18-02-2010 09:47 PM

Try RS Components.

A mate of mine got his from there. You need a ball ended one to get in better

sparrow.2

18-02-2010 09:59 PM

Best way to do it would be to use 2.5mm head screws and fitting ball driver as the head is usually deeper and won't strip as easily as the 2mm headed screws.

Big G

18-02-2010 11:09 PM

sure that's an option. either 2mm or 2.5mm will work fine as I'll just change the screws to suit :)

All times are GMT. The time now is 09:26 PM.