oOple.com Forums - FTX PHANTOM 12th??

oOple.com Forums (http://www.oople.com/forums/index.php)

- 12th & 10th On Road (http://www.oople.com/forums/forumdisplay.php?f=14)

- - FTX PHANTOM 12th?? (http://www.oople.com/forums/showthread.php?t=40023)

DNC	14-02-2010 07:36 PM

FTX PHANTOM 12th??

Hi Guys
Could anyone help with a set up for this car. I haven't run the car yet!
The kit came with green tyres all round. I will change to purple front/grey rear. Not sure how to change the front ride height?

Chequered Flag Racing

14-02-2010 07:50 PM

Quote:

Originally Posted by DNC (Post 344155)

Not sure how to change the front ride height?

Remove the 2 screws in each lower arm and insert a spacer that should have come with the car. This will lower the front end. You should aim for no less than 3mm front & rear. £1 coin is a good guide.

spacers will look similar the ones in this pic

http://t0.gstatic.com/images?q=tbn:e...n%2520Arms.jpg

another type of front ride height shim

http://www.actionmodelcentre.co.uk/p...ghtshims-L.jpg

read this http://www.carsrcracing.co.uk/?page_id=65

greasy mark

14-02-2010 08:28 PM

fiber lite also do a set of shims for this

Chequered Flag Racing

15-02-2010 02:33 PM

Quote:

Originally Posted by greasy mark (Post 344187)

fiber lite also do a set of shims for this

I use to get them cut and sell them, they were better than the ones by Fibre-Lyte, although they cut mine. Much easier to use. Action Model Centre now own the pattern I had. I'll see if I can find a picture.

DNC	19-02-2010 07:36 PM

Thats all really useful info thanks
Had my first outing with the FTX this week! Its awesome fun! Think I could get addicted to 12th?? though I did break a wishbone. It now has a complete L4 front end and body posts! The associated parts look my stronger!

rich67

19-02-2010 07:41 PM

Check out associated L4 setups as its virtually the same car but not carbon.

Chequered Flag Racing

19-02-2010 08:03 PM

Quote:

Originally Posted by DNC (Post 346355)

Thats all really useful info thanks
Had my first outing with the FTX this week! Its awesome fun! Think I could get addicted to 12th?? though

you will :thumbsup:

Quote:

Originally Posted by DNC (Post 346355)

though I did break a wishbone. It now has a complete L4 front end and body posts! The associated parts look my stronger!

they are stonger and a whole lot better car

read this
http://www.carsrcracing.co.uk/?page_id=65

and read and print this
http://richardchang.com/hobby.php?topic=112setup

DNC	23-02-2010 06:57 PM

any ideas on which brushless system to fit??

All times are GMT. The time now is 03:22 AM.