Worksop CR2....
 

Hi Guys

Has anyone got a setup for worksop indoors for CR2 just a starting point. Done a bit of work on the CR2 tonight ive done the idler gear mod again and added a bit more weight to the rear of the car and taken some away from the front...

Added a bit of brass to the back of the side pods to get more weight over the rear end... weight 8 grams each but have a 5 gram weight under them...

http://img35.imageshack.us/img35/3797/dscf3460.jpg

http://img715.imageshack.us/img715/4864/dscf3459.jpg

http://img689.imageshack.us/img689/803/dscf3458.jpg

http://img683.imageshack.us/img683/4307/dscf3457g.jpg

http://img62.imageshack.us/img62/1679/dscf3456.jpg

A

I gave Northy a set-up for Worksop which he liked, he too moved the weight from the front to the rear to improve the weight balance in the car. You can ask him.

Ashley, I can PM you a good starting point that I have used at Bury which is like Worksop. But I would just go out and use your current setup and see how that feels change one thing at a time.

If your not happy with the car then have a look at other peoples setups.

Motor ???

Tony

Camber on rear wheels looks positive...:confused:
:)

It is i changed the camber link a little and it always takes me about 12 years to get it back to normal lol :p Im useless and setting camber :p

Can i have a look at your setup tony just to see if mine is anywhere near.

Motor Basically Ive stripped the bottom motor screw thread out of my motor so it doesnt hold very well but i might have a solution to this if this doesnt work i might have to buy the motor if that is ok?

A

Fixed my Motor just need to check its legality.

A